Our Products
Total products: 23
Cold Saw Blade
Universal application and high performance -Kanefusa cold saw blades can be reground several times -The saw blades are manufactured upon request to a …
Application: Cuts solids and tubes
Material: Carbon steels, alloy steels, special purpose steels, non-ferrous metals
Dry Cut Saw Blade
-Dry Cut saw blade is low cutting resistance blade for sawing steel with high resistance against successive shocks.
Application: Sawing Reinforcing Rod, Steel Plates, Angle Steel, Pipe, C type Steel, and Difficult-to-machine Stainless Steel
Material: Various Steels
Ferro Max Dies
For Die steel solids Special coating up to 100% longer tool life compared with Ti-5 -Due to the special coating, the lifetime of Ferro Max Dies can be …
Application: Cuts solids
Material: Die steel
Ferro Max Speed
Higner cutting speed for less cycle time and higher productivity -Ferro Max Speed saw blades can be run with cutting speeds of over 200 m/min, which …
Application: Cuts solids and tubes
Material: Carbon steel, alloy steel Tensile strength 500 - 1000 N/mm2
Ferro Max Speed LC
-Higher cutting speed achieved for low carbon steel. -Special coating and carbide edge up to 100％ longer tool life.
Application: Cuts solids and tubes
Material: Carbon steel, alloy steel Tensile strength ≦ 600N/mm2
Ferro Max ST-5
Carbon steel solids (C: ≦0.45 %) -With higher wear and adhesion resistant tooth tips, it achieves more stable and longer sawing performance for …
Application: Cuts solids
Material: Carbon steels, alloy steels Carbon content : ≦0.45 %
Ferro Max ST-5P
-With high chipping resistant cermet tooth edge ,it achieves more stable sawing performance for pipes and billets in the harsh condition which …
Application: Cuts solids and tubes
Material: Carbon steels, alloy steels Carbon content : ≦0.45 %
Ferro Max Super Tube
High cutting speed for thin wall tubes - Ferro Max Super Tube is suitable to cut high tensile strength tube (＞600N/mm2) with cutting speed of over …
Application: Cuts thin walled tubes
Material: Carbon steel, alloy steel Tensile strength 600 - 1400 N/mm2
Ferro Max SUS
Improved blade life by newly developed coating New tip design -The newly developed coating improves adhesion resistance and wear resistance. It …
Application: Cuts solids
Material: Stainless steels
Ferro Max SUS Tube
High cutting speed for thin wall tubes - Ferro Max Super Tube is suitable to cut high tensile strength tube (＞600N/mm2) with cutting speed of over …
Application: Cuts thin walled tubes
Material: Carbon steel, alloy steel Tensile strength 600 - 1400 N/mm2
Ferro Max Ti-5
-Highly abrasion resistant tungsten carbide edges, treated with a special coating for the longest tool life -Special brazing technology leads to a …
Application: High carbon steel solids and tubes
Material: High carbon steels, alloy steels, special purpose steels except stainless steel or heat resistant steels) Carbon content : ≧ 0.4 %
Ferro Max Tube
For thin wall tubes without deformation of the wall -To avoid the swarf adhesion into the gullet, the number of teeth in the cut should be less than 3 …
Application: Cuts thin walled tubes
Material: Carbon steel, alloy steel Tensile strength 400 - 600 N/mm2
Mold Pro
Various thin walled metal Saw Blade -Suitable for cutting various compound metals including stainless steel -sharpened several times -Special brazing …
Application: Cuts thin sheets, tubes, profiles
Material: Thin walled metals including stainless steel
Mold Pro II
For cutting stainless steel moldings for automobiles - Tougher tips means improved chipping resistance 20% longer blade life than conventional models …
Application: Cutting stainless steel moldings for automobiles
Material: Stainless steel moldings for automobiles, thin steel plates, steel pipes, stainless materials and composite materials up to 1mm.
Novametal
-Novametal is of single use -Novametal enables high process reliablity -Novametal clearly outlasts tungsten carbide tipped saw blades -Novametal is …
Application: Cuts solids
Material: Non-ferrous metal alloys with high silicon content
PCD Saw Blade
-PCD saw blades can be reground several times -The saw blades are manufactured upon order and designed according to the application -Kanefusa high …
Application: Cuts solids
Material: Non-ferrous metal alloys with high silicon content
Sash Pro
Heavy Duty Saw Blade -Runs very quiet due to vibration damping slits LS-P in the plate -Excellent lifetime and cut quality due to flat and even plate …
Application: Cutting of extruded profiles, thin sheets and bars
Material: Non-ferrous metals such as aluminum or brass
SASH PRO HV
Burrs on the work material are reduced by high precision edge grinding. Longer life by reducing initial burrs. Beautiful cut surface such as a mirror.
Application: Cutting of extruded profiles, thin sheets and bars
Material: Non-ferrous metals such as aluminum or brass
SASH PRO-sw
Scratch Prevention on products caused by falling swarf during transportation. Less cleaning time around the machine.
Application: Cutting of extruded profiles, thin sheets and bars
Material: Non-ferrous metals such as aluminum or brass
Stable Saw Blade
Thin kerf Saw Blade -On average 20% thinner than conventional saw blades -Tremendous material saving and reduction of recycling cost -Runs quieter and …
Application: Cutting of extruded profiles and bars
Material: Non-ferrous metals such as aluminum or brass
Tube Max
- Specialized in Heat- and wear-resistance more than Tube Max Scarf, for cutting without scarfs (unfixed weld beads) or less defects occurring due to …
Application: For pipe cutting with a single and twin flying cut-off machine
Material: ERW pipes, Welded pipes without scarfing (unfixed welding beads)
Tube Max Orbital
-Improved blade shape and coating achieve better wear-resistance and product lifetime. Maintains stability even when cutting high-tensile steel pipes …
Application: For pipe cutting with an orbital flying cut-off machine
Material: ERW pipes, Welded pipes
Tube Max Scarf
- Improved tooth shape and wear-resistant tip grade minimize product defects that occur due to scarfs (unfixed welding beads) on the pipe. - The …
Application: For pipe cutting with a single and twin flying cut-off machine
Material: ERW pipes, Welded pipes with scarfing (unfixed welding beads)